TianJin Chhyt Water Tank Co.,Ltd.

Tel,Whatsapp,Wechat,Skype

+8613116079626

    FRP water tanks is the abbreviation of Fiberglass Reinforced Plastic water tanks,are leading industry and civil standard water storage equipment on the market.There are many advantages such as lightweight,strong structure,modular and sectional assembly by standard panels design. GRP tanks provide safe environment with no risk of bacteria corrosion.

Furthermore,Due to the raw material to manufacturing water tank is self-resistant to bad weather and high temperature,meaning the water tank lifespan is long.Meanwhile,all raw materials attribution decides the water tank is pliable,application wide for any specific access or needs.



1What is FRP Water Tank?

FRP water tanks is the abbreviation of Fiberglass Reinforced Plastic water tanks,are leading industry and civil standard water storage equipment on the market.There are many advantages such as lightweight,strong structure,modular and sectional assembly by standard panels design. FRP tanks provide safe environment with no risk of bacteria corrosion.

Furthermore,Due to the raw material to manufacturing water tank is self-resistant to bad weather and high temperature,meaning the water tank lifespan is long.Meanwhile,all raw materials attribution decides the water tank is pliable,application wide for any specific access or needs.

2What is HDG Water Tank?

HDG water tank is the short of Hot Dip Galvanized water tank,with 90 μm thick surface zinc coating of Q235 Pressed Steel. Zinc coating can help to prevent rust and corrosion over at least 10 years. HDG water tanks have the most panels types including 1000 x 1000 mm,1000 x 500 mm,500 x 500 mm,1220 x 1220 mm.So HDG water tanks are more flexible and high cost-effective.Meanwhile,the strong steel structure and zinc coating protection has made it available to be used as  underground water tank.

3What is GSC Water Tank?

GSC modular water tank is Galvanized and Stainless Steel Compound water tank.Made from 3 types of raw materials.Inner is stainless steel plate and outer is hot dip galvanized plate with one layer of high modular materials sandwiched.High pressure and high temperature to form this new type of compound plate.Because of inner stainless steel plate and outer steel structure,it has the advantages of storing drinking water. GSC modular water tank could be applied either ground or underground used for rainwater colletion,which effectively solved tight earth issues by underground water tank application.

4 What is Stainless Steel Water Tank

Stainless steel grades,such as the 316 or 304 types which are generally suitable for storing both cold and heat drinking waters.There are two connection ways including bolt-connection and welding connection.For welding one,it is connected through argon welding way and it is more fast to installation completion.Both two types stainless steel water tank could meet the high precise science and technology water storing or somewhere with strict water quality demands.In addition,stainless steel welding water tank is afraid of high chloride concentration water.Welding point will reduce the nickle content and lose the ability to prevent corrosion from high chloride water.

5 What material should I choose?

We mainly have four material:FRP,HDG,GSCand stainless steel,please tell us what kind of water will you store,we will recommend you the suitable one.

6 How can I decide the tank’s size?

Please tell us the tank’s volume you need,we will advice you some choices,based on the installation site,you choose the right one. All of our water tanks are combined sectional type with each panel 1m x 1m, 1m x 0.5m and 0.5m x 0.5m,1m*1.5m,1m*2m etc. Our water tanks can be with size from 0.125cubic meter to 2000cubic meters per set.In addition to the above,the panel of mental tanks can be combined with size of 1.22m*1.22m,1m*3m,1m*4m.

7Does the installation easy?

We will send you the installation instruction and the video for your reference.Step is easy.

8What should I do before install the tank?

Make a concrete base,concrete base’s size is based on the tank’s size,we will send you drawing of it.

9If I order a tank,what will you send me for the assembling?

Tank panels and the accessories include bolts,nuts,inside&outside ladders,flanges,water guage,rubber sealed,base channel,inside bar,tie rod etc.

10What is the tank’s service life?

At least 30 years

11How to Maintenance the Water Tank?

1.Operation

1)Clean the tank regularly according to the water regulation.(PS:Twice a year for cleaning,once a month for sanitation check)

2)Operate water in/out value slowly to prevent the impact on water tank by hammering effect when fill/drain water.

3)The tank room should be strictly off limits to anyone who is not an operator.

2.Special Instruction for Winter Season

1)Shut out the indraft of cold air into the tank-room.

2)In case of non-usage of water more than 1 week,drain the water completely from the tank to prevent freezing.

3)Check the insulation on inlet pipe.

4)Check the servomechanism,inlet/outlet pipe,etc.regularly.

12what are the tanks widely used for?

Potable Water Storage Tanks

Agricultural Irrigation Tanks.

Septic Tanks and Sewage Tanks

Distillation and Process Tanks

Fire Reserve Storage Tanks,Swimming Pool Balance Tanks

Hot Water Storage Tanks and Chemical Substance Storage Tanks

Rain Water Harvesting Tanks,Well Water Tanks,Sea Water Tanks

Reverse-Osmosis Water Tanks(water with high or low conductivity)

Industrial Process Tanks,Chiller Water Tanks,Cooling Tower Water Tanks

13If I need some one come to our country guide the installation of the water tank,it is ok?

Yes,we can arrange people to help you assemble the water tank.

14.How to repair the tanks?

How to repair water tank can be done with or without the help of an expert. For small leaks and malfunctions, a repair kit is all you need.

For basic water tank repair, simply follow this procedure:

Ensure that the tank is empty, drain all remaining water inside.

Remove ragged parts of the rupture or damage.

Cut a section to cover the opening by a margin of about 1 to 2 inches.

Mix a batch of epoxy resin with its catalyst.

Apply enough amount of resin around the tank’s rupture, covering the area that the patch will be placed over.

Set the patch in place.

Cover the top of the patch with additional resin, making sure to coat the seam between the patch and the tank.

Let the patch be dry overnight, and preferably 24 hours before using the tank again.

However, for more technical repair, calling an expert is advised.

15How to clean the water tanks?

Water tank cleaning can be tiring but ensuring the water inside your tank to be clean and bacteria-free is very important. Below is the basic water tank cleaning procedure:

Drain the water

Open the outlet valve or tap to empty all stored water from the tank.

Remove the water at the bottom of the tank by scooping it with a bucket.

Remove remaining water out of the tank by using a sponge. Vacuum dry the tank to ensure its dryness.

Clean the inside of the water tank.

Make a cleaning mixture. hot water with laundry detergent powder or liquid can create a good mixture as a tank cleaning solution.

Make a cleaning mixture. hot water with laundry detergent powder or liquid can create a good mixture as a tank cleaning solution.

Scrub the inside of the tank with a brush or abrasive sponge while applying a good amount of pressure. From side to side horizontally is the right direction to remove sludge and slime from within. Avoid steel brush as it may scratch the tank walls and surface.

If available, it is much better to use a power washer to clean tough sediments and residues.

Baking soda is a good medium to remove particular dirt on your tank walls. By sprinkling a small amount of baking soda then scrubbing it with brush will get off the unwanted dirts which cannot be removed by soap solution alone.

Scrub the corners and joints as special attention is needed to remove dirts from this areas and it needs extra time compared to the plain surfaces. Small toothbrush can help in cleaning portion.

Rinse thoroughly once satisfied with the cleaning result. Rinsing can be done with a hose to spray down interior walls making sure all the nooks and every corners has been completely cleaned up.

Remove remaining liquid and residue through cleaning with a vacuum.

Flush your tank's hoses and pipes by putting cleaning solution to remove sticking sediment and dirt inside.

16 How much do water tanks cost?

Water tank price will vary according to types, size, and brands. Either for light duty or heavy duty, research is a must prior to buying.

Getting an idea on how much a water tank cost, manufacturers guide will help best. Every manufacturers have their own range of prices but the crucial thing to know is to select for the manufacturers producing the quality that you needed most.

Either you are planning to purchase  for an affordable one or an expensive water tank, what will really matter is the one that is reasonable according to your budget. Reasonable in terms that you are really paying for the quality that you expect.

Sizes matters as well in addition to brands. For household purposes, smaller size maybe required, therefore, lesser cost is expected. But for large companies, since larger water tank is needed, then an extra price allocation should be done.

Lastly, the environment where water tank will be installed will matter too. Like those put up nearby seashores or on sea vessels, then stainless steel water tank is really needed of higher grade must be chosen to resist extreme corrosion, therefore, price of this kind is expected to be a bit costly than ordinary water tanks.

After all, buying a water tank will all depend on the consumer’s needs. Reviews from different users will only serve as a guide prior to purchasing one but what is needed most is the personal research and contact of every water tank manufacturers. No positive or negative review of a water tank can change the real performance of the item purchased.

Contact our sales team with any queries you may have and we will be happy to quote your project and give our expert advice on the type of tank that would best suit your requirements. We manufacture four types of sectional water tanks using both “hot press” and “hand laid” production methods. Each tank design may be manufactured with un-insulated panels and insulated panels.

图片展示

 

   ADD:  No.16,Wangwen Industrial park,Xiqing District,Tianjin City,China

   Tel,whatsapp,Skype,wechat :+8316116079626

    Email:info@watertank1999.com

 

 

 

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了